LISTING OF SUPPLEMENTAL INSPECTIONS

1. Supplemental Inspection Procedures

A. Each of the supplemental inspections has the instructions to do each Nondestructive Testing procedure needed.

B. Procedure

(1) Each 2A-14-XX section has the details of the inspection and if needed, a reference to the Nondestructive Testing procedure for that inspection.

(2) The supplemental inspections that reference a Nondestructive Testing procedure will refer to 2A-13-01 document for the details of the procedure.

(3) The supplemental inspection numbers in the list below agree with the number for the Nondestructive Testing procedure, if applicable. Refer to Inspection Requirements - Hours to Years Equivalence.

C. If an airplane has exceeded the inspection limits given, the inspection must be done before June 30, 2014. Inspections in subsequent revisions to the SID shall be accomplished in accordance with the requirements of the revised inspection.

D. Service Information Letters/Service Bulletins

(1) In addition to this maintenance manual, the following service information will be required to complete the SID inspections (2A-14-XX document sections).

Bulletin Title Associated Service Kit

SE79-49 Nut Plate Inspection - Vertical Fin Attach Bracket (for units

15279406 thru 15284541,

SEB01-01 Rudder Stop Modification SK152-24A, SK152-25A

SEB03-6 Vertical Tail Attach Bracket and Aft Horizontal Stabilizer Spar

Inspection (for units 15279406 thru 15284541)

SEB07-4 Floorboard/Seat Pan Crack Inspection

SEB87-04 Aileron Hinge Inspection

SEB94-03 Rudder Spar Inspection/Replacement

SEB95-03 Flap Support Inspection and Roller Washer Installation SK180–44

SEB96-07 AN3-5A Bolt Inspection/Replacement